330654_INS NEW Grill Alert 3/18/05 9:21 AM Page 9
GRILL ALERT™ OPERATION
1.Connect MEAT PROBE CONNECTOR to TRANSMITTER SOCKET.
2.Turn on the transmitter by pressing and holding the POWER for two seconds. Light will flash on LED.
3.Turn on the monitor by pressing and holding POWER for two seconds. The LCD SCREEN will illuminate.
4.Check RECEPTION ICON 
. It indicates whether or not you’ve established signal connection by flashing.
IMPORTANT: If you have not established a signal connection, check the following:
•Check synchronization of transmitter and monitor by pressing both RESET buttons within 60 seconds of each other to synchronize units and establish signal. On the monitor, RESET is located in the battery compartment, and on the transmitter RESET is located on the outside of the battery compartment. (See Location of Indicators illustration on page 7.)
•Shorten the distance between transmitter and monitor. (Maximum transmission range is 300 feet.)
•Check batteries and replace if necessary.
5.Select the meat you are cooking by pressing SELECT until your desired meat appears on the display: BEEF, LAMB, VEAL, HAMBURGER, PORK, TURKEY, CHICKEN or FISH.
8
LOCATION OF INDICATORS
MONITOR AND TABLE STAND
A.POWER - Turns the unit on/off. Press and hold for two seconds to activate unit.
B.SELECT - Selects the type of meat (BEEF, LAMB, VEAL, HAMBURGER, PORK, TURKEY, CHICKEN and FISH).
C.COOK - Selects the doneness of certain types of meat (RARE, MED RARE, MEDIUM and WELL DONE).
D.LIGHT ( 
) - Turns the screen backlight on for three seconds.
E.TABLE STAND - Secures the unit on a flat surface.
F.LCD SCREEN - 
G.BELT CLIP - Clips onto a belt for mobility.
H.BATTERY COMPARTMENT AND DOOR - Accommodates two AA
I.VOLUME (LO/HI) - Adjusts the volume for alert signals (low or high). Unit
J.RESET - Returns all settings to their original values and synchronizes the transmitter and monitor.
5
Doc. Size: 5"W x 4.75"H |
|
330654INS grill alert Instructions | Output at 100% Prints 1/0 Black |
|
|
