Brother 7500, 7600 Language

75

Appendix

The label is not printed

after pressing p.

Has text been entered? A label will not be printed if there

is no text entered.

Is the tape cassette installed

correctly, and is there enough tape

remaining?

Check that the tape cassette is

installed correctly, and that there is

enough tape remaining.

Is the end of the tape bent?

If bent, cut the bent section of tape

with scissors and thread the tape

through the tape exit slot correctly.

Is the tape jammed?

If jammed, remove the tape

cassette, carefully pull out the

jammed tape, and then cut the tape

with scissors. Check that the end of

the tape passes through the tape

guide, and reinstall the tape

cassette.

Is the tape compartment cover

open?

If so, close the tape compartment

cover correctly.

The LCD messages are

displayed in a foreign

language. Is the language set properly?

Refer to Changing the

Language on page1 2 and select

the desired language for the LCD

messages.

The label is not printed

correctly.

Is the tape cassette installed

correctly?

When installing a cassette, press

firmly until it clicks into place.

Is the print head clean?

If not, clean the print head using a

cotton swab or optional print head

cleaning cassette (TZ-CL4).

Is the rechargeable battery pack

charged sufficiently?

If the battery indicator comes on,

charge the rechargeable battery

pack.

The ink ribbon is

separated from the ink

roller.

Is the ink ribbon in the tape cassette

loose, or did you pull on the label

coming out of the tape exit slot?

If the ink ribbon is broken replace

the tape cassette. If not, leave the

tape uncut and remove the tape

cassette, then wind the loose ink

ribbon onto the spool as shown in

the figure.

The P-touch stops while

printing a label.

Is there enough tape remaining in

the tape cassette?

The striped tape indicates you have

reached the end of the tape. Replace

the tape cassette when the striped

tape appears.

Are the batteries weak and is the

AC adapter disconnected?

Replace all batteries or connect the

AC adapter directly to the P-touch.

Problem Cause Solution

Spool

PT75007600uk.book Page 75 Thursday, July 10, 2008 9:39 AM

Contents

Main Page i Before Using Your P-touch Safety precautions WARNING CAUTION ii iii iv CAUTION v General Precautions Contents 1. Getting Started ..............................................................1 2. Label Type Modes ........................................................13 3. Basic Functions ............................................................19 vii 4. Machine Adjustments ..................................................42 Cleaning ...................................................................................... 45 5. Using P-touch With a Computer (for PT-7600 only) ...47 Installing the Software & Printer Driver ......................................47 6. Appendix .....................................................................74 1 1 1 Unpacking Your P-touch PT-7600 Page Getting Started PT75007600uk.book Page 3 Thursday, July 10, 2008 9:39 AM General Description Top view & bottom view Top view Bottom view Keyboard & LCD screen 5 Back light Power Supply AC Adapter Connecting the AC adapter 6 Notes on the AC adapter Batteries Installing the batteries Notes on batteries 7 Rechargeable battery pack (for PT-7600 only) Installing the rechargeable battery pack Page 9 Notes on the rechargeable battery pack Tape Cassettes Installing a tape cassette 10 Notes on tape cassettes Strong Adhesive Tape 11 Flexible ID Tape Turning the P-touch On/Off Changing the Language 2 E A ABCDE Selecting a Label Type Mode Rotate and Rotate & Repeat Modes Flag Mode Port and Panel1 Modes Panel2 Mode Page Basic Functions Performing Basic Operations Choosing functions, parameters, settings and groups Choosing the default setting Confirming a choice Inputting Label Data Entering and editing text Entering characters Entering spaces Moving the cursor 21 Adding a new line of text Adding a new text block Inserting text 22 Entering an accented character Entering a bar code 24 Setting bar code parameters Entering bar code data Basic Functions Entering a symbol There are 164 symbols and pictures available with the Symbol function. Page Page Formatting the Label Specifying a label length Specifying a margin size Category Symbols O Z Framing the text 30 Specifying the character size Formatting the Global character size of all text Formatting the character size of a line 31 Specifying the character width Formatting the Global width of all text Formatting the width of a line 32 Specifying the character style Formatting the Global character style of all text Formatting the character style of a line 33 Specifying the alignment for all lines in the text Using the pre-formatted Auto Format templates Printing Labels Previewing the label layout 35 Feeding tape Printing a label Using special printing functions Printing multiple copies of a label 36 2A-C16 ABC 2A-C15 2A-C14 37 Printing a range of text blocks LM 38 Printing mirrored labels ABC 39 Combining special printing functions Storing and Recalling Files Storing label text A-1 A-1 A-2 A-2 A-3 A-3 Recalling text that has been stored Deleting text that has been stored Page 4 Selecting how tape is fed and cut Adjusting the display contrast Using the Auto Reduction function Calibrating the label length Updating the PERSONAL symbol category Changing the units of measure Displaying version information Cleaning Cleaning the print head, rollers and tape cutter Page 5 (for PT-7600 only) Installing the Software & Printer Driver Introduction System requirements Installing P-touch Editor 5.0 and the Printer driver 49 Installing P-touch Editor 5.0 50 Installing the Printer driver Page Page Uninstalling P-touch Editor 5.0 Uninstalling / Replacing the printer driver 54 Using P-touch Editor 5.0 Notes on creating templates Starting P-touch Editor Page 57 Layout window Express Mode 58 Professional Mode 59 Snap Mode Starting P-touch Editor Help Starting from Start button Page 61 Printing the Help description Transferring Data To/From a Computer Entering Transfer mode How to use P-touch Transfer Manager & P-touch Library Starting up P-touch Transfer Manager 63 Layout window 64 Explanations of the Icons Transferring label templates from the PC Page Adding a user-defined character image to the text Using template data 67 Using a template not linked to a database Using a template linked to a database 68 Using downloaded database data Adding database data to a label 69 Using database data in a Label Type mode 70 Searching the database Backing up label templates 71 Deleting all the P-touch data 72 Starting up the P-touch Library Opening and editing data Searching labels Page 6 Troubleshooting Resetting the P-touch the machine back on. The P-touch turns on with the internal memory reset. Language Error Message List 1 BLOCK LIMIT! 7 LINE LIMIT! g , then n CHECK # OF DIGITS ENTERED! BUFFER EMPTY! BUFFER FULL! CUTTER ERROR! TAPE CASSETTE CHANGED! CHECK BATTERIES! Page SET 24mm! SET 18mm! TEXT TOO LONG! SET 6mm! SET 9mm! VALUE OUT OF RANGE! BAR CODE TOO LONG! OK TO REDUCE THE BLOCK NO.? BLOCK NO. CHANGE CLEAR TEXT? Machine Specifications Main Unit Page Operating Environment: Windows 83 (for PT-7600 only) Accessories Laminated tapes (length: 8 m) Page 85 Non-laminated tapes (length: 8 m) 86 Strong adhesive tapes (length: 8 m) Flexible laminated tapes ideal for labelling network cables, electrical wires, etc. Laminated tapes with stronger adhesive, ideal for rough surfaces or h arsh environments. Flexible ID tapes (length: 8 m) 87 Security tape (length: 8 m) Cassette tape for cleaning the print head of your P-touch. This tape leaves a checkered pattern when removed. Fabric tape (length: 3 m) Index A B C D I J K L M R S T U V