13
8When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.
(For Windows® XP)
(For Windows® 98/98SE/Me/2000)
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine. Brother
recommends that you connect the
machine directly to your computer.
9Plug in the power cord and turn on the
machine.
0For Windows® 98/98SE/Me /
2000 Professional users, cli ck Next.
Windows® XP users should wait for a while;
installation of the Brother drivers will start
automatically. The installation screens
appear one after another.
DO NOT try to cancel any of the
screens during this installation.
AWhen the On-Line Registrati on screen is
displayed, make your selection and follow
the on-screen instructions.
BWhen the following screen appears, click
Finish and wait as the PC restarts
Windows® and continues the installati on.
Continued...
Installing the Drivers & Software
Setting Up
the machine
Network
Administrators Windows®
Parallel