27

Make sure that you have fini shed the instructions from Step 1 “Setting U p

the machine” on pages 4 - 7.
1Switch off the machine an d disconnect the
machine from the power sock et and from
the Macintosh®.
2Turn on your Macintosh®.
3Insert the supplied CD-ROM for Macintosh®
into your CD-ROM drive.
4Double-click the Start Here OSX icon to
install the printer and scanner drivers. If the
language screen appea rs, choose your
language.
5Click MFL-Pro Suite to install.
6Follow the on-screen instru ctions, and
restart your Macintosh®.
7After the DeviceSelector window appears,
connect the network interface cable to the
machine, and then co nnect it to a free po rt
on your hub.
8Plug in the power cord and tur n on the
machine.
For Network Interface Cable Users (DCP- 8065DN only)
For Mac OS® X 10.2.4 or greater
The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine before restarting your
Macintosh® or if you are overwriting a
previously installed version of the Brother
software. If you encounter this problem
continue with the installation skipping steps 9
to 11. You should then select your Brother
machine from the Model pull-down list in the
main screen of ControlCenter2. (For details,
see the software User’s Guide on the
CD-ROM.)
Continued...
Installing the Drivers & Software
Setting Up
the machine
Macintosh®
Network
Network
Administrators