Buttonhole Sewing | Brother 885-V60 specs

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

BUTTONHOLE SEWING

Buttonholes can be sewn and buttons can be sewn on.

Pattern No.

Stitch Width

Stitch Length

NeedleTwin

FootWalking

Reverse/ Reinforcement Stitching

Pattern

FootPresser

stitches70 model

stitches40 model

[mm (inch.)]

[mm (inch.)]

stitches60 model

stitches50 model

Stitch Name

Application

Auto

Manual

Auto

Manual

Horizontal buttonholes

5.0

3.0-5.0

0.5

0.2-1.0

*

A

29

29

29

25

on thin and medium

No

No

Auto

(3/16)

(1/8-3/16)

(1/32)

(1/64-1/16)

weight fabrics

Rfc.

Secured buttoholes for

5.0

3.0–5.0

0.5

0.2–1.0

*

A

30

30

30

26

fabrics that have back-

No

No

Auto

(3/16)

(1/8-3/16)

(1/32)

(1/64-1/16)

ings

Rfc.

Buttonholes for stretch or

6.0

3.0–6.0

1.0

0.5–2.0

*

A

31

31

31

27

No

No

Auto

knit fabrics

(15/64)

(1/8-15/64)

(1/16)

(1/32-1/16)

Rfc.

Buttonhole

Buttonholes for stretch

6.0

3.0–6.0

1.5

1.0–3.0

*

A

32

32

32

28

No

No

Auto

stitch

fabrics

(15/64)

(1/8-15/64)

(1/16)

(1/16-1/8)

Rfc.

Keyhole buttonholes for

7.0

3.0–7.0

0.5

0.3–1.0

*

A

33

33

33

29

No

No

Auto

thick or furry fabrics

(1/4)

(1/8-1/4)

(1/32)

(1/64-1/16)

Rfc.

Keyhole buttonholes for

7.0

3.0–7.0

0.5

0.3–1.0

*

A

34

34

–

–

medium weight and thick

No

No

Auto

(1/4)

(1/8-1/4)

(1/32)

(1/64-1/16)

fabrics

Rfc.

Keyhole buttonholes for

7.0

3.0–7.0

0.5

0.3–1.0

No

*

A

35

35

–

–

No

Auto

thick or furry fabrics

(1/4)

(1/8-1/4)

(1/32)

(1/64-1/16)

Rfc.

Zigzag stitch

Appliqué quilting, free-

3.5

0.0–7.0

1.4

0.0-4.0

**

J

40

40

–

–

motion quilting, satin

No

Yes

(for quilting)

(1/8)

(0–1/4)

(1/16)

(0-3/16)

Rfc.

stitching, button sewing

3

*Auto Rfc.: Automatic Reinforcement **Rfc.: Reinforcement

CAUTION

●Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing.

The maximum buttonhole length is about 28 mm (1-1/8 inches) (diameter + thickness of the button). Buttonholes are sewn from the front of the presser foot to the back, as shown below.

aReinforcement stitching

51

Image 53

Brother 885-V60 appendix Buttonhole Sewing, Buttonholes can be sewn and buttons can be sewn on

885-V60 specifications

The Brother 885-V60 is a versatile sewing machine that caters to both novice and experienced sewers alike. With its myriad of features and advanced technologies, it stands out as a reliable tool for creating a wide variety of projects, from basic mending to intricate quilting.

One of the main features of the Brother 885-V60 is its 60 built-in sewing stitches, which include utility stitches, decorative stitches, and auto-size buttonhole options. This selection allows users to explore their creativity and tackle diverse sewing tasks with ease. The machine also offers a one-step buttonhole function, making it simple to create perfectly sized buttonholes in a matter of seconds.

The Brother 885-V60 boasts a generous sewing area, equipped with a large extension table that provides ample space for handling larger projects like quilts. This extended work surface enhances stability and support, ensuring that even extensive pieces can be managed comfortably. The adjustable stitch width and length further allow for customization of stitches, catering to individual preferences for each project.

Another highlight of the Brother 885-V60 is its automatic needle threader, which simplifies the threading process and reduces eye strain, particularly for those who may struggle with manual threading. The machine also features a jam-resistant drop-in bobbin system, making it quick and straightforward to replace the bobbin without any complications.

The LED lighting built into the Brother 885-V60 illuminates the workspace, ensuring visibility while working on intricate designs, even in low-light conditions. This feature is invaluable for detailed projects where precision is crucial.

In terms of technology, the Brother 885-V60 includes a variety of presser feet, allowing users to switch between functions easily. The machine supports various feet such as the zipper foot, walking foot, and quilting foot, providing flexibility and enhancing the sewing experience.

Additionally, the integrated speed control feature offers users the ability to adjust the sewing speed according to their comfort level, making it easier for beginners to build confidence or for seasoned sewers to work on complex projects efficiently.

Durable and built to last, the Brother 885-V60 is an excellent investment for anyone looking to enhance their sewing capabilities. With its combination of user-friendly features, advanced technology, and robust performance, this sewing machine is poised to meet the demands of a wide range of sewing enthusiasts.

Contents

Sewing Basics Utility Stitches Appendix Page Important Safety Instructions For a longer service life For Users in the UK, EIRE, Malta Cyprus only Contents Utility Stitches About zigzag foot J AccessoriesIncluded accessories Accessory compartment Optional accessories Main parts Names of Machine Parts and Their Functions Buttons provided on some models Needle and presser foot sectionOperation buttons Spool pin Operation panel BPushplace.the spool pin down until it locks into Shown.1 Power supply Using Your Sewing MachinePower supply precautions Changing the needle stop position Foot controllerAright to select the desired sewing speed Side of stitch selection key BRemove the spool cap Threading the MachineWinding the bobbin DSlide the spool cap onto the spool pin KTrim the excess thread above the bobbin Make sure that the thread passes under the pretension disk For models equipped with the fast bobbin winding system Thread is cut to a suitable length Actual size 11.5mm 7/16 inch This model Lower threading For models equipped with the quick-set bobbin Slit Cutter Cut the thread with the cutter Upper threading GSlide the spool cap onto the spool pin Remove the spool cap Thread take-up lever Needle bar thread guide Catch the thread on the hook as shown below DFully lower the needle threader lever Bobbin cover should still be removed Drawing up the lower threadLightly hold the end of the upper thread Needle types and their uses Needle precautionsReplacing the Needle Replacing the needle Checking the needle CLower the presser foot lever Install the twin needle in the same way Sewing with the twin needle Installthread.the thread spool and thread the upperThread the upper thread for the left needle For details, refer to steps a through l of Upper threading HAttach zigzag foot J For details, refer to step a through l of Upper threadingModels equipped with a needle threader Turn on the sewing machine Select a stitch Replacing the presser foot Replacing the Presser FootReplace the presser foot as described below Mark on the wheel points up. With models For details, refer to Replacing the presser foot Removing the presser foot holderRemove the presser foot Page Sewing General sewing procedureFollow the basic procedures below to sew Selecting stitching DIfwidth.necessary, adjust the stitch lengthPress the + or side of to increase or On the left changes the digit on the left Right of in the LCD Adjusting the stitch length and width BRaise the presser foot lever Starting to sewOn the wheel points up. With models equipped Each other Raise the presser foot leverSewing reinforcement stitches Correct tension Thread tensionUpper tension is too tight Upper tension is too loose Trial sewing Useful Sewing TipsChanging the sewing direction Sewing curves Presser foot remains level, allowing the fabric to be fed Sewing hook-and-loop Fastener Sewing stretch fabrics Sewing thin fabricsStitching cylindrical pieces Slide the flat bed attachment to the left to release it Overcasting Stitches Using zigzag footAttach zigzag foot J Select stitch , or CSew with the edge of the fabric Attach overcasting foot G Select stitch or Using overcasting foot Basic Stitching When sewing is finished, cut the threadBasic stitching For details, refer to Starting to sew Reverse the skirt or pants Blind HEM Stitching Fold back the fabric inside along the basting If the needle does not catch the hem fold Stitch widthThick fabric Normal fabric Auto Rfc. Automatic Reinforcement **Rfc. Reinforcement Buttonhole SewingButtonholes can be sewn and buttons can be sewn on Size of the buttonhole is set Raiseposition.the buttonhole lever to its original Once sewing is completed, Trim off any excess of the gimp thread Sewing buttonholes on stretch fabrics DPlacethe fabric.a button between the presser foot Button sewingESelect a stitch With stitch Select stitch Normally, the feed dog position lever is Positioned at After sewing for about 10 seconds at low Refer to Basic stitching on Zipper InsertionRev. Reverse Do not use reverse stitching Sew the stitching in order, from a to c FSelect stitch Stretch stitching Sewing Stretch Fabrics and Elastic TapeElastic attaching BAttach zigzag foot J CSelect stitch Utility Stitches Piecing APPLIQUÉ, Patchwork and Quilt Stitching Patchwork crazy quilt stitching AppliquésPiecing Remove the basting, if necessary For a seam allowance on the left side QuiltingDSelect stitch Sewing Free-motion quilting Using the optional quilting guide† Walking foot † Presser foot holder ARemoveholder. the presser foot and the presser foot Slide the feed dog position lever, located at Triple stretch stitching Reinforcement StitchingBar tack stitching Attach zigzag foot J Select stitch Start sewing Pullpossible.down the buttonhole lever as far as Once sewing is completed, Decorative Stitching Fagoting Smocking Scallop stitchingDTrim along the stitches CSew parallel stitching at intervals of 10 mm 3/8 inch Joining Shell tuck stitchingFold the fabric along the bias BAttach zigzag foot J Unfold the fabric, and then iron the tucks down to one side Heirloom stitching Utility stitches Stitch Settings Pattern No Decorative Stitch Buttonhole Bar tack For decoration, etc For decoration, etc Yes Cleaning the machine surface MaintenanceCleaning the bobbin case Remove the bobbin case Align the U and marks Needle plate cover Upper thread tightened up TroubleshootingFrequent troubleshooting topics For details, refer to Cleaning the bobbin case on SymptomTangled thread on wrong side of fabric Cause Incorrect upper threading HFeed the upper thread as shown in the illustration below Thread take-up lever Incorrect thread tension If threads remain in the bobbin case, remove them Fabric is caught in the machine and cannot be removedDRemoveholder. the presser foot and presser foot Be careful not to drop the removed screws in the machine Memo Checking machine operations Do not yet install the presser foot and threadTurn on the machine Select middle needle position stitch Correctly thread the machine List of symptoms Machine does While sewingNot work Fabric being Sewn with Thread breaks UpperLower Or breaks Skipped Stitches areThere is a high Pitched noise While sewing Thread has After sewingTightened up Thread Operation beep for models equipped with the operation beep Error Messages Numerics Index 42 , 45 English 885-V60/ V61 XE6528-1011