Brother 885-X03/X13/X23 manual 45

——————

Symptom	Possible cause	How to put it right	Page
▲
The fabric is	The thread tension is incorrect.	Adjust the tension of the upper thread.	26
wrinkled.
	You have not threaded the upper thread	Correct the upper threading.	16
	properly.
	You have not used the right combination of	Choose a thread and needle that are	21
	fabric, thread and needle.	appropriate for the type of fabric.
Stitches are
skipped.	The needle is bent or blunt.	Replace the needle.	7
	The needle is incorrectly installed.	Correctly install the needle.	7
	Dust has accumulated under the needle	Remove the needle plate and clean the	40
	plate or in the bobbin case.	plate and the bobbin case.
		Raise the needle by turning the
The needle	The needle has not been raised to the	handwheel toward you	18
	correct position.	(counterclockwise) so that the mark on
threader can
		the wheel points up.
not be used.
	You have not inserted the needle properly.	Insert the needle properly.	7
	The presser foot that you are using is not	Attach the presser foot that is correct
		for the type of stitch that you want to	–
	correct for the type of stitch.
		sew.
The stitch is
	The thread tension is incorrect.	Adjust the tension of the upper thread.	26
not sewn
correctly.
		Remove the tangled thread. If the
	The thread is tangled.	thread is tangled in the bobbin case,	40
		clean the bobbin case.
	The stitch is too fine.	Lengthen the stitch length.	–
	The darning plate is fitted on the needle	Remove the darning plate.	–
	plate.
	You have not used the right combination of	Choose a thread and needle that are	21
The fabric	fabric, thread and needle.	appropriate for the type of fabric.
does not feed.
	The thread is tangled, for example, in the	Remove the tangle thread. If the thread	40
	race.	is tangled in the race, clean the race.
				6
	The presser foot you are using is not	Attach the presser foot that is correct
	appropriate for the type of stitch that you	for the type of stitch that you want to	36
	want to sew.	sew.

44