Direct Drive Programmable Electronic Pattern Sewer with Cylinder Bed<Treble Hook> 130mm x 60mm

BAS-300G-484

Direct Drive Programmable Electronic Pattern Sewer

with Cylinder Bed<Treble Hook with Intermittent Presser Foot> 130mm x 60mm

BAS-300G-484SF

Less frequency of bobbin change

Upper thread feeding device is equipped as standard

Stable sewing

Accurate thread cutting and thread wiper

Intermittent presser foot(-SF only)

CF card media for data transfer

Easy creation of sewing data with PD-3000 (available separately)

PD-3000

 

PS-300B

BAS-300G-484SF

 

Proven KE-484C for heavy, extra-heavy materials sewing for seat belt has been powered up its attraction as BAS-300G series.It brings accurate sewing finishes for extra-heavy materials.

Treble hook equipped

Treble hook allows three times lower thread to be wound compared to standard hook. This reduces the frequency of bobbin changes, leading to productivity enhancement.

Accurate and stout sewing

Thread pulling-out is prevented at sewing start

The upper thread feeding device supplies the necessary length of upper thread at the start of sewing, preventing the thread from pulling-out regardless of the material feeding amount.

Exceptional stitch quality

The use of the advanced servo controlled, heavy duty feed mechanism combined with the robust needle bar/thread take-up assembly, create precise stroke/feed timing conditions for optimal stitch formation. This provides excellent, superb stitch quality and tight stitching for a wide range of sewing applications.

Accurate thread cutting

With adoption of the proven KE-484C thread cutting mechanism and 30% larger pneumatic cylinder, enables threads to be cut more accurately. It allows Extra thick threads to be cut accurately and consistently.

Accurate thread wiper

The thread wiper is also driven by a pneumatic cylinder. The upper thread can be wiped accurately even under conditions where the thread is difficult to pull out of the material.