Brother BAS-415 manual Set Strp, NNo. # # # # # # # # #, RSt # # # # # # # # #

SETTING THE ROTATE, MIRROR, REPEAT

After loading your design and at the display below, do the following.

Set STR_P. Co. # #

N_No. # # # # # # # # #

EDIT

To enter EDIT mode.

To select which option you wish to change.

To enter that options EDIT

EDIT values.

To change the values of the option you choose

END	To EXIT the edit mode
START	To return to the above display
	with changes in effect.

“FLOATING” THROUGH A DESIGN

To move through a design after you have started sewing you must first STOP the machine.

R_St: # # # # # # # # # Co. # #

N_No. # # # # # # # #

Press “#” to display a “J” in the grey

#box

To move by 100 stitches either

FORWARD or BACK in design

Press “#” again to display a “C” in

#the grey box

To move by color changes either

FORWARD or BACK in design

Press “#” again to display a “T” in

#the grey box

To move BACK only to the first stitch of the design

Press “#” To display a “I” in the grey

#box

To move the frame in small increments to correct registration

ERASING A STORED DESIGN FROM MEMORY

	Use BACK and FORWARD keys
	to pick a design from memory.
ENTER	Press ENTER to view design name
CLEAR	Press CLEAR to delete the design
	from machine memory.
END	Press END to return to
	“FileNo” screen
SETTING HOOP FEED POSITION
HOOP	Press HOOP FEED to move the frame to
FEED	the current HOOP FEED position
	If you wish to change the position
	Use the ARROW keys to move the frame
	to a new position
ENTER	Press ENTER to store the new HOOP
	FEED position
HOOP	Press HOOP FEED to toggle between
FEED	sewing position and hoop feed position

MOVING THE NEEDLE CASE

NEEDLE To enter the NEEDLE

SELECT SELECT mode

To move the needle case left and right.

To EXIT the NEEDLE SELECT

END mode