25
4
4
Troubleshooting 4
If you think there is a problem with your cordless handset, check the chart below and follow the
troubleshooting tips.
Most problems can be easily resolved by yourself. If you need additional help, the Brother
Solutions Center offers latest FAQs and troubleshooting tips. Visit us at
http://solutions.brother.com.
If you are having difficulty with your cordless handset 4
Troubleshooting and Routine Maintenance 4
Difficulties Suggestions
The cordless handset does not
operate.
Check that the battery is charged properly. (See Charging the
battery onpage 27.)
Dialling or receivi ng does not w ork. Check phone l ine connec tion of the mach ine (base unit).
Check that the machine (base unit) is plugged in. For dialling feature, check that
the machine (base unit) is not in Power Save Mode.
Check that the battery is charged properly. (See Charging the
battery onpage 27.)
Move closer to the machine (base unit). The cordless handset may be too far away
from the machine (base unit).
If you have registered the handset to more than one machine (base unit), check
that you have chosen the correct machin e (base unit) from t he handset menu.
(See Choosing Base uniton page 16.)
Bad phone line connec tion Make sure that there ar e no possible sou rces of radio interf erence between the
machine (base unit) and the cordle ss handset.
Move closer to the machine (base unit). The cordless handset may be too far away
from the machine (base unit).
During the conversation, try adjusting the angle of the antenna on the right of the
machine (base unit) to improve rec eption.
Move away from walls.
The battery does not c harge. Check that the battery is installed proper ly in the cordless handset. (See
Replacing the batteryonpage 28.)
Check that the cordless handset is placed properly in the cradle and LED turns
green. (See Charging the batteryon page 27.)
Clean the charge cont acts for both cordl ess handset and the cradle. (See
Cleaningon page 28.)
The battery performance is still
poor after recharging.
It is time to replace the battery. (See Replacing the bat tery on page 28.)
The cordless handset beep s during
a call.
Move closer to the machine (base unit). The cordless handset may be too far away
from the machine (base unit).
Your battery may be discharged. If you want to continue the call, transfer the call
to the machine (base unit) and use the Speaker Phone key to answer. (See
Transferring a call at the end of a conversationon page 14.) Charge the battery.
(See Charging the battery on page 2 7.)