Brother Computerized Sewing and Quilting Machine operation manual Automatic Thread Cutting

USEFUL FUNCTIONS

cPlace the fabric under the presser foot with the needle at the starting point of the stitching, and then press the “Start/Stop” button. The machine will automatically sew reverse stitches (or reinforcement stitches), and then begin sewing.

a

aReverse stitches (or reinforcement stitches)

Memo

If you press the “Start/Stop” button to pause sewing, then press it again to continue, reverse stitches (or reinforcement stitches) will not be sewn.

dIf the “Reverse/Reinforcement Stitch” button is pressed, the machine automatically sews reverse stitches (or reinforcement stitches), then stops.

a

aReverse stitches (or reinforcement stitches)

Memo

To cancel the automatic reverse/reinforcement

stitching setting, press again so that it appears

as .

Automatic Thread Cutting

If the automatic thread cutting setting is selected before sewing, the machine will automatically sew reinforcement stitches (or reverse stitches, depending on the selected stitch) and cut the thread when the “Reverse/Reinforcement Stitch” button is pressed at the end of stitching. This is useful when sewing buttonholes and bar tacks.

Memo

The automatic thread cutting setting can be selected when the automatic reinforcement/reverse stitching setting is selected.

aSelect a stitch.

bPress to select the automatic thread cutting setting.

→The key appears as .

cPlace the fabric under the presser foot with the needle at the starting point of the stitching, and then press the “Start/Stop” button. The machine will automatically sew reverse stitches (or reinforcement stitches), and then begin sewing.

a

aReverse stitches (or reinforcement stitches)

Memo

If you press the “Start/Stop” button to pause sewing, then press it again to continue, reverse stitches (or reinforcement stitches) will not be sewn.

46