25

1
fSlowly lower the presser foot lever so that the
presser foot pin snaps into the shank in the
presser foot holder.
aPresser foot lever

XThe presser foot is attached.

gRaise the presser foot lever to check that the
presser foot is securely attached.
Removing the presser foot holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
quilting foot. Use the screwdriver to remove the
presser foot holder.

■Removing the presser foot holder

aRemove the presser foot.
• For details, refer to “Replacing the presser
foot” (page 24).
bUse the screwdriver to loosen the presser foot
holder screw.
aScrewdriver
bPresser foot holder
cPresser foot holder screw

■Attaching the presser foot holder

aAlign the presser foot holder with the lower-
left side of the presser bar.
aPresser foot holder
bPresser bar
bHold the presser foot holder in place with
your right hand, and then tighten the screw
using the screwdriver in your left hand.
aScrewdriver
bPresser foot holder
cPresser foot holder screw
Note
●If the presser foot holder is not correctly
installed, the thread tension will be
incorrect.