47
3
cSelect stitch .
dPosition the fabric so that the opening of the
pocket faces toward you, and then lower the
presser foot lever so that the needle drops
2 mm (1/16 inch) in front of the pocket
opening.
a2 mm (1/16 inch)
Pass the upper thread down through the hole
in the presser foot.
• When lowering the presser foot, do not push
in the front of the presser foot, otherwise the
bar tack will not be sewn with the correct
size.
aDo not reduce the gap.
ePull down the buttonhole lever as far as
possible.
aButtonhole lever
The buttonhole lever is positioned behind the
bracket on the buttonhole foot.
aButtonhole lever
bBracket
fGently hold the end of the upper thread in
your left hand, and then start sewing.
XOnce sewing is completed, the machine automatically sews reinforcement stitches, then stops.
gRaise the presser foot lever, remove the
fabric, and cut the thread.
hRaise the buttonhole lever to its original
position.
Memo
●If the fabric does not feed, for example,
because it is too thick, increase the stitch
length. For details, refer to “Selecting
stitching” (page 27).
1