INTRODUCTION 1 - 3
3 Stop/Exit
Stops an operation or exits from the
menu.
4 Mono Start
Lets you start making copies in
black and white.
Also, lets you start a scanning
operation (in colour or black,
depending on the scanning setting
in the ControlCenter2 software).
5 Colour Start
Lets you start making copies in full
colour.
Also, lets you start a scanning
operation (in colour or black,
depending on the scanning setting
in the ControlCenter2 software).
6On/Off
You can turn the machine on or off.
If you turn the machine off, it will still
periodically clean the print head to
maintain print quality.
7Ink Management
Lets you clean the print head, check
the print quality, and check the
available ink volume.
8Scan
Lets you access Scan mode.
9 PhotoCapture
Lets you access the PhotoCapture
Center™.
0Liquid Crystal Display (LCD)
Displays messages on the screen to
help you set up and use your
machine.
The LCD examples in this guide are
for models with a one-line display.
There may be slight differences
between the examples provided
and models with a two-line display.
AWarning LCD
Turns red when LCD displays an
error or an important status
message.