Windows® Operation

INSTALLING HARDWARE

Do not connect the scanner to your computer until instructed to do so by the driver installation software. When 1 instructed to do so, connect the scanner cable as shown below and follow the instructions.

After you have installed the software, follow the steps below. Then, proceed to Calibration.

a Connect the USB cable to the scanner and to a USB port on your computer as shown below (either to a desktop or laptop computer). If necessary, please check your computer’s user guide to identify the USB ports available and their locations.

b The following message will be displayed, and the computer will automatically detect the new hardware device installed and it will be ready for use.

8