2 - 1 GETTING STARTED
2

Initial Setup

Setting the Date and Time

When the machine is not in use it will display the date and time. If yo u
set up the Station ID the date and time displayed by your machine
will be printed on every fax you send. If there is a power failure, you
may have to reset the date and time. No other settings will be
affected.
1
Press Menu/Set, 0, 2.
2
Enter the last two digits of the year.
Press Menu/Set.
3
Enter two digits for the mont h.
Press Menu/Set.
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Press Menu/Set. (For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Press Menu/Set. (For example, enter 15:25 for 3:25 P.M.)
6
Press Stop/Exit.
The LCD now shows the date and ti me whenever the machine
is in Fax mode.

Setting Tone or Pulse dialling m ode

(Not available in New Zealan d)

1
Press Menu/Set, 0, 4.
2
Press or to select Pulse (or
Tone).
Press Menu/Set.
3
Press Stop/Exit.
Getting started
2.Date/Time
4.Tone/Pulse