Frequently asked questions
Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage.
Cooktop or burners cannot be turned on
Possible fault | Solution |
|
|
The circuit breaker has | Reset the circuit breaker (see the data plate for |
tripped. | minimum breaker ratings). |
|
|
There may be a technical | – Disconnect the appliance from the main power |
problem. | supply for approx. 1 minute. |
| Reset the circuit breaker or replace the fuse and |
| turn the appliance back on. If the appliance still |
| cannot be turned on, contact a qualified |
| electrician or Miele. |
|
|
"LC" appears in the timer display for several seconds after turning on the cooktop.
The system lock has been activated.
Deactivate the system lock (see "Child safety lock / System lock").
"dE" appears in the timer display for several seconds after switching on the cooktop. Burners do not heat up.
The device is in demo mode.
Deactivate demo mode (see "Programming").
The cooktop turns off while it is in use.
One of the burners has been on for too long.
Not a fault. You can start the burners again (see "Safety
The heating for one of the burners turns on and off.
Power levels 1 to 8: | This turning on and off is normal. It is caused by |
Not a fault. | the electronic heat regulation (see "How the |
| burners operate"). |
|
|
Power level 9: Fault. | The overheat protection automatically turns a |
The overheating protection | burner off if the ceramic surface is in danger of |
has triggered. | overheating. Once the ceramic surface has |
| cooled down, the burner automatically turns back |
| on (see "Overheat protection".) |
|
|
34
