Installation
The exact positions of the spring clamps and the support bars (for beveled cooktops only) are shown in the "Installation dimensions" of each unit.
Facet cooktops:
A special sealing strip ensures the
Create the countertop cutout as shown in the "Installation dimensions". Observe the safety distances (see "Installation Safety Instructions").
Wood or solid surface countertop
Seal the cut surfaces with a suitable sealant to avoid swelling caused by moisture.
The materials used must be heat resistant.
Ensure that these materials do not get on the top surface of the countertop panels.
Position the spring clips and the securing strips (supplied with the appliance; only for facet cooktops) on the top edge of the
Attach the spring clips and the securing strips with the
3.5 x 25 mm wood screws (supplied).
48