RS900
One Pair 6” x 9”
Dear Customer,
CONGRATULATIONS.
The RS900 6” X 9”
Parts & Specifications
•6”x9” Polypropylene Sprayed Paper Cones
•20 Oz. Magnet per Speaker ±10%
• Foam Rubber Surrounds
Installation
Location
If you are installing the RS900 speakers to upgrade/replace your existing speakers, re- move the existing speakers from your vehicle, disconnect the speaker wires and mark the polarity. Place the RS900 speakers in the location you selected in your vehicle and connect the existing speaker wires. Make sure to keep the polarity of the speakers and wires correct (positive wire to positive speaker terminal and negative or ground wire to negative terminal)
| Speaker Depth | |||
Before you install your speakers you must make sure you | 3" or 7.62 cm | |||
|
|
|
| |
have enough depth/space behind the mounting surface. |
|
|
|
|
|
|
|
| |
You do not want the back of the speaker magnet to touch any part |
|
|
|
|
of your vehicle, or interfere with the operation or function of any |
|
|
|
|
component in your vehicle. (ie. windows or trunk lid) |
|
|
|
|
|
|
|
|
|
Mounting
You should only mount your speakers in factory precut holes. We DO NOT recommend that you cut holes for mounting the speakers. If there are no factory precut holes consider having the speakers pro- fessionally installed.
Frequently Asked Questions
What if there is no sound?
1.Your stereo may have a blown fuse. Replace fuse with the same amperage and style.
2.You may have improper wiring. Refer to the wiring guide that came with your stereo/ amplifier. Check all wires for a secure connection.
What if the sound volume is low?
Your stereo may not have enough power, you may have to install an amplifier to drive the speakers
Why do I have a whining noise coming from the speakers?
You may have poor filtering of your alternator. If that is the case then you may need to add an alternator filter to the power lead.
Why do I have odd sounding noises coming from the speakers?
You may have corroded battery terminals and/or a weak battery. If the terminals on the battery are corroded clean them, then check the sound. If the sound system is still making noises check battery strength. If it is low, recharge or replace the battery.
Why does the speaker have sound coming from one channel only?
First make sure the balance control is set correctly. If the balance is set correctly your stereo may be defective or the speaker may be defective. To troubleshoot
this problem you MUST change both positive and negative leads of each channel with the positive and negative leads of the opposite channel, if the same speaker has no sound then the speaker is no good, if the opposite speaker has no sound then your stereo may be defective.
• 400 Watts Instantaneous Peak Power per Pair
• 80 Watts RMS per Pair |
| |
• 50 - 20,000 Hz Frequency Response |
| |
• Mylar Midrange speakers | 2 Speakers | |
• Mylar Tweeters | ||
|
•Quick Release Terminals
•Protective Grills
8 Spring Nuts | 8 Screws | 2 Grills |
|
1.Connect the speaker wires to the speaker. Maintain polarity by connecting the positive wire to the positive speaker terminal, and the negative wire to negative speaker terminal.
2.Slip the supplied spring nuts into place and align the holes.
Spring Nut
INTERIOR PANEL
SPEAKER GRILL
The small hole of the spring nut is on this side of panel
SPRING NUT
SPEAKER
WIRE
GIVE US A CALL, WE'LL HELP YOU INSTALL.
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
For Information and Technical Assistance,
Call
Limited Warranty
Tools Needed To Install
• Nail Set/Center Punch | • Phillips Screwdriver | • Marker/Pen | • Wire Cutter | |
|
|
|
| |
|
| • Electric Drill |
| |
• Safety Glasses | • Hammer | with 1/16" bit | • Electrical Tape | |
|
| |||
Before You Install
We understand that automotive audio equipment installations can be troublesome at times, even to the most experienced of installation technicians. If you are not confi- dent working with electrical wiring, removing and reinstalling interior panels, carpet- ing, dashboards or other components of your vehicle, please call our
Before installing these speakers, check the vehicle’s manual for locations of important vehicle components such as air bags, CO2 systems, fuel systems,
&electrical systems installed in the vehicle. Accidental deployment of air bags may result in serious injury.
3.Screw the speaker into place with screws (provided).
4.Firmly attach the speaker grill cover.
Speaker wires with female disconnects on one end are recommended. When connect- ing the speaker wires to your speakers in a new installation, you should follow the wiring instructions from your audio system’s manu- facturer.
Attach the quick disconnect connectors to the speaker terminals as shown. Maintain proper polarity by attaching the Positive Wire(+) to Positive Terminal(+) and the Nega- tive
For most systems the positive wire attaches to the positive speaker terminal and the neg- ative wire attaches to the negative terminal.
Maintain proper polarity by attaching the Positive Wire(+) to Positive Terminal(+) and the Negative
VIRTUAL REALITY SOUND LABS® products are designed and manufactured to provide a high level of
CONDITIONS OF WARRANTY:
If during the 30 day warranty period your new product is found to be defective, VIRTUAL REALITY SOUND LABS® will repair such defect, or replace the product, without charge for parts or labor subject to the following conditions:
1.All repairs must be performed by VIRTUAL REALITY SOUND LABS® and/or its affiliates in Eatontown, New Jersey.
2.The equipment must not have been altered or been damaged through negligence, accident, or improper operation.
3.The replacement of parts are exempted from this warranty when replacement is necessary due to normal wear and tear.
4.All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
5.Repair or replacement parts supplied by VIRTUAL REALITY SOUND LABS® under this warranty are protected only for the unexpired por- tion of the original warranty.
6.In the case of car stereos, this warranty does not extend to the elimination of car static or motor noise; correction of antenna problems; costs incurred for the removal or reinstallation of the product; damage to tapes, speakers, accessories or car electrical systems.
7.VIRTUAL REALITY SOUND LABS® will not be responsible for any charge incurred for installation.
OWNER’S RESPONSIBILITIES:
VIRTUAL REALITY SOUND LABS will make every effort to provide warranty service within a reasonable period of time.
SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SER- VICE, PLEASE CALL TOLL FREE
In order to provide you with the proper warranty service, we request that you adhere to the following procedure:
1.Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty service.
2.If it is necessary to return your product for service, please return it securely packed, preferably in the original shipping carton, and freight and insurance prepaid to the following address: VIRTUAL REALITY SOUND LABS, Service Department, 41 James Way, Eatontown, New Jersey 07724.
3.Please include a detailed explanation of the problem you are having.
4.If your product is found by VIRTUAL REALITY SOUND LABS® to have a defect in material or workmanship, within the warranty
period, it will be repaired or replaced at no charge and returned to you prepaid. Where permitted by Iaw VIRTUAL REALITY SOUND LABS® liability shall be limited to that set forth in this warranty. This warranty shall be the exclusive remedy of the purchaser.
VIRTUAL REALITY SOUND LABS® makes no other warranty of any kind, expressed or implied; and all implied warranties, are hereby disclaimed by VIRTUAL REALITY SOUND LABS® and excluded from this warranty, VIRTUAL REALITY SOUND LABS® and/ or its affiliates, the manufacturer, distributor and seller shall not be liable for any injury, loss or damage, incidental or consequential, arising out of the use or intended use of the product.
©2008 Intellectual Solutions Inc., All rights reserved. All designs, logos and images are the exclusive property of Intellectual Solutions Inc. and/or its affiliates. U.S. and Foreign Patents Pending. 072908 Printed in China 00000
