
Follow the instructions for your interface cable and operating system.
For Parallel interface cable users (For Windows® users only) Step 4 Connect the printer to your PC & Install the printer driver
I O
ON OFF
1 Click "Connect the interface | 2 Select the parallel interface cable. | 3 Turn off the printer power switch. | 4 Connect the interface cable to your PC, and |
cable & install the driver / |
| then connect it to the printer. | |
utilities." | screen.) |
|
|
I | O |
| CANCEL |
|
|
|
|
|
| ||
ON | OFF |
|
|
|
|
5 Turn on the printer | 6 Follow the instructions | Note: If "Add New Hardware | 7 Click the Next button. | 8 Click the Finish button. | |
power switch. | on the screen. | Wizard" appears, click the |
| The setup is now complete. |
For USB interface cable users (For Windows® users only) Step 4 Install the driver & Connect the printer to your PC
For USB interface cable users (For Macintosh® users only)
Step 4 Install the driver & Connect the printer to your Macintosh®

Note: Make sure the USB interface cable is NOT connected to the printer, and then begin installing the driver. If you already connected the cable, remove it first.
1 Click "Connect the interface | 2 Select the USB cable. |
cable & install the driver / |
|
utilities." |
|
I O
ON OFF
1 Click "Connect the interface cable & | Note: If this screen appears, | 2 Follow the instructions on the screen, |
install the driver / utilities." | select USB cable. | and restart your Macintosh® . |
I O
ON OFF
4 Click the Next button. | 5 When this screen appears, make sure the printer power switch is on. |
| Connect the USB interface cable to your PC, and then connect it to the printer. |
| Click the Next button. |
3 Make sure the printer power switch is on. | 4 Open the Chooser from the Apple® | 5 Click the |
Connect the USB interface cable to your Macintosh® , and then connect it | menu on the Macintosh® . | and select it. |
to the printer. |
| The setup is now complete. |
Step 5 Setting your printer as the Default printer (For Windows® 2000 users only)
1 Click Start, Setting and Printers. | 2 Select the Brother HL- | 3 Click the File menu, and then | 4 The setup is now complete. |
| 1440/1450/1470N series icon. | select Set as Default printer. |
|
For Network users (For HL-1470N users only)
After the administrator has made the required settings, install the driver referring to the "Installing the Driver for Network Users" section of the Quick Network Setup Guide.
Control Panel |
|
| LED |
|
| |||
|
| Drum | Near end of life |
| ||||
|
|
|
|
|
| Ready | Sleep mode | Press the button to wake up the printer. |
|
|
|
|
|
|
| Warming up (at 1 second intervals) |
|
|
| Drum |
|
|
|
| Ready to print |
|
|
|
|
|
|
| Alarm | Printer error | Press the button to clear the error. |
|
|
|
|
|
|
|
|
|
|
| Ready |
|
|
| Data | No data |
|
|
| Paper |
|
|
|
| Receiving data |
|
|
|
|
|
|
|
| ||
|
| Alarm |
|
|
|
| Data remaining in memory | Press the button to print any data in memory. |
|
|
|
|
| ||||
|
| Toner |
|
|
| Ready + Alarm | Paper jam, paper misfeed or no paper |
|
|
|
|
|
|
| |||
|
| Data | LED is OFF | Alarm + Data | Toner low (every 5 seconds) |
| ||
|
|
| ||||||
|
|
| LED is blinking |
| Toner empty |
| ||
|
|
| LED is ON |
|
|
| ||
|
|
| Button |
|
| |||
|
|
|
|
|
|
|
| |
|
|
|
|
|
| Cancel printing | Printer stops printing and ejects the paper. |
|
|
|
|
|
|
| Reprinting | Printer will reprint the last job. When the Data LED is off, press and hold the button until all the | |
|
|
|
|
|
|
| LEDs light. |
|