CHAPTER 4 OPTIONS

☛6. Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM snap inward into place. (To remove a DIMM, the locks must be released.)

Fig. 4-11

☛7. Install the PCB Access Plate. Secure the PCB Access Plate with the two screws.

Fig. 4-12

☛8. Re-install the Interface Cover.

☛9. Reconnect the interface cable (printer cable) from your computer. Plug the power cord into the AC outlet, and then turn on the power switch.

☛10. After you turn on the printer, the current RAM disk size will appear on the

LCD. Check it to make sure you added the new memory correctly.

4-15