Printing Methods
19
2
cPull out the MP tray support and unfold the flap (1 ).
dLift up the support flap to prevent paper from slidin g off the face-down output tray, or remove each page
as soon as it comes out of the printer.
ePut paper in the MP tray. Make sure that the pa per stays under the maximum paper mark (1).
Note
• Do not put more than 3 envelopes in the MP tray.
• Enve lope joints that are sealed by the manufacturer should be secure .
• The sid e to be printed on must be face up.
• All sid es of the envelope should be properly folded without wrink les or creases.
1
1