Brother Brother, KIT I

Chapter 1

How to Create Bobbin Work

Contents

Main CONTENTS BEFORE YOU START NEW FEATURES Page Page PREPARING FOR BOBBIN WORK Required Materials Bobbin case and bobbin cover Lower thread Upper thread Upper Threading Preparing the Bobbin Thread by hand. After winding the bobbin so it is filled as shown below (about 80%), cut the thread. close to the bobbin as possible. When tension is applied to the bobbin thread When tension is not applied to the bobbin thread cover with tabs. a b unit. This completes the upper and lower threading. CREATING BOBBIN WORK (SEWING) Positioning the Fabric and Sewing Page Bobbin Work Free Motion Sewing CREATING BOBBIN WORK (EMBROIDERY) Selecting the Pattern Start Embroidering Page Page ADJUSTING THE THREAD TENSION Adjusting the upper thread tension Adjusting the tension of the bobbin thread TROUBLESHOOTING The thread was accidentally cut automatically and the bobbin thread is caught inside the machine The pattern is misaligned The bobbin thread catches on the tension spring of the bobbin case Page HOW TO USE NEW FEATURES Displaying the Fabric While Aligning the Embroidery Position then attach the frame to the embroidery machine. . the pattern, the pattern can be edited if it is necessary. desired embroidery position. Positioning the pattern on thick fabric CHANGING THE PATTERN SIZE WHILE MAINTAINING THE DESIRED THREAD DENSITY (STITCH RECALCULATOR) mode ( ). . Page Page Embroidery Patterns Color Change Table embroidering b c number d e