FAX-8360P Quick Setup Guide
THANK YOU!
… FOR PURCHASING YOUR BROTHER MACHINE.
WE ARE SURE YOU WILL BE IMPRESSED WITH THE CONVENIENT WAY THAT YOUR NEW MACHINE PERFORMS SO MANY TASKS WITH GREAT RESULTS!
Follow these simple instructions in numerical order.
For greater detail, consult your Owner’s Manual.
Alternatively, if you cannot solve a problem:
Refer to Frequently Asked Questions (FAQ’s) on Brother Solutions Web Site:
URL: http://solutions.brother.com
For Australia/New Zealand
You must select the country where you use the machine after installing the power code.
1 Packing List
Drum Unit Assembly | Document Support |
|
Mains Power Cord (2 Main Power Cords for Asia Only)
Telephone Line Cord
(2 Telephone Line Cords for Australia 
Owner’s Manual and New Zealand Only)
Adapter
(For Australia Only)
Document Tray
with Extension
Quick Setup Guide
Keep the packing materials for possible future transport. If you do not pack the machine properly, it may void your warranty.
2 Install Drum Unit
3 If you have Optional Paper Tray, connect it (otherwise go to Step 4)
A.Unpack the drum unit assembly, and gently rock it from side to side five or six times to distribute the
toner evenly inside the cartridge.
To prevent damage to the drum, do not expose it to light for longer than a few minutes.
B. Remove the protective part.
C.Open the front cover of the
machine.
D.Insert the drum unit assembly into the machine.
E.Close the front cover.
A. Carefully pick up the | B. Plug the modular cable from the Lower |
machine and place it on | Tray into the modular socket on the |
top of the Optional | machine. |
Paper Tray (Lower |
|
Tray). |
|
C.The optional paper cassette must be used in place of the upper paper cassette. See instructions supplied with the Optional Paper Tray.
To select which tray will be used for faxes or for copies, see Lower Tray (With Optional Paper Tray Only).
If you move the machine after connecting the Lower Tray, be sure to carefully lift the Lower Tray with the machine because they are not fastened together.
4 Attach Document
Tray/Support
Document
Support
Document Tray with Extension
5 Load Paper
A.Pull the paper cassette completely out of the machine.
B.Adjust the paper guides at the right and rear of the paper
cassette for the paper size you want.
C.Load paper in the paper
cassette. Press down on the paper to flatten it in all four corners, keeping the paper level below the guide marks.
D. Slide the paper cassette into the machine until it locks into place.
6 Install Mains Power
Cord and Telephone
Line Cord
Maximum |
|
|
Paper |
|
|
Height |
|
|
Guide | Mains Power Cord | Telephone Line Cord |
Marks |
7 Set Your Country
(For Australia/New Zealand Customer Only)
8 Telephone Answering Device (TAD),
You must set your country so that the machine works correctly.
A.Check that the power is turned on (by plugging in the power cord).
The LCD shows:
SET COUNTRY
PRESS SET KEY
B.Press Set.
The LCD shows:
AUSTRALIA
SELECT 
& SET
NEWZEALAND |
|
SELECT | & SET |
C.Press 
or 
to select the country (AUSTRALIA or
NEWZEALAND).
(Be careful you set your country.)
D.Press Set when the LCD shows your country.
E.The LCD prompts you to make sure of the country again.
AUSTRALIA 1.YES 2.NO
F.Press 
to go to Step G 
to go back to Step A to select the country again.
G.After the LCD shows ACCEPTED for two seconds.
External/Extension Telephone
TADTAD
ExternalExtension
TelephoneTelephone
ACCEPTED
(Example for Australia)
– 1 – | LE8235001 |