- 31 -
(9) Close the top cover.
(10) Turn the power on. Press Feed button until you
can see the edge of the film to remove any
slack from the film.
Replacing the corner cutter tray
The cutter performance will decline as blades are dulled.
You can improve it by changing the corner cutter tray.
The both sides of corner cutter can be used. Before using new corner cutter tray, try to remove the corner
cutter tray as shown below and reinsert it after changing the surface of tray upside down.
Use the following operation to replace the corner cutter tray when necessary.
Corner Cutter Tray (Corner cutter tray CC-1)
(1) Remove the corner cutter tray as illustrated.
(2) Install the new corner cutter tray.
Note
Use Brother authorized cutter units (SC-2 or CC-1) only.
Other cutter units, (top/bottom cutter unit and the upper blade of the corner cutter) are not replaceable.
Please consult your dealer if these cutter units become damaged.