106
Clean the outside of the machine as
follows: B
aPull the paper tray (1) completely out of
the machine.
bWipe the outside of the machine with a
soft cloth to remove dust.
cLift the output paper tray cover and
remove anything that is stuck inside the
paper tray.
dWipe the inside and outside of the paper
tray with a soft cloth to remove dust.
eClose the output paper tray cover and
put the paper tray firmly back in the
machine.
Cleaning the scanner B
aLift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
b(MFC-260C only)
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a soft lint-free
cloth moistened with a non-flammable
glass cleaner.
Note
In addition to cleaning the glass strip with
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning.
11
3
2
1
2