Setting Up the Machine
12
STEP 1
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press to move the
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press or to move the cursor to
the incorrect character, press Clear/Back.
6Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step 1.
For details, see Entering Text in
Appendixes C of the User's Guide.
10 Setting tone or pulse dialling
mode
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
1Press Menu.
2Press a or b to choose Initial Setup.
Press OK.
3Press a or b to choose Tone/Pulse.
4Press or to choose Pulse (or Tone).
Press OK.
5Press Stop/Exit.
11 Setting t he telephone line
type
If you are connecting the machine to a line that
features PBX or ISDN to send and receive faxes, it is
necessary to change the telephone line type
accordingly by completing the following steps.
1Press Menu.
2Press a or b to choose Initial Setup.
Press OK.
3Press a or b to choose Phone Line Set.
4Press or to choose PBX, ISDN
(or Normal).
Press OK.
5Press Stop/Exit.
PBX and TRANSFER
The machine is initially se t to Normal, which lets the
machine connect to a standard PSTN (Public
Switched Telephone Network) line. However, many
offices use a central telephone system or Private
Branch Exchange (PBX). Your machine can be
connected to most types of PBX. The machine’s
recall feature supports timed break recall only (TBR).
TBR will work with most PBX systems allowing you to
gain access to an outside line, or send calls to another
extension. The feature works when the R key is
pressed.
Press
key
One
time
Two
times
Three
times
Four
times
2ABC2
3DEF3
4GHI 4
5JKL5
6MNO6
7PQRS
8TUV8
9WXY Z