For Network Users
Web Based Management (web browser)
The Brother print server is equipped with a web server that allows you to monitor its status or change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).
Note
•The default User Name is ‘admin’ and the default password is ‘access’. You can use a web browser to change this password.
•We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 3.0 (or greater) for Windows® and Safari 3.0 (or greater) for Macintosh. Please also make sure that JavaScript and cookies are always enabled in whichever browser you use. To use a web browser, you will need to know the IP address of the print server. The IP address of the print server is listed on the Network Configuration Report.
a
b Type “http://machine’s IP address/” into your browser’s address bar (where “machine’s IP address” is the IP address of the printer or the print server name).
For example http://192.168.1.2/
See Web Based Management in the Network User's Guide.
22
Print the Network Configuration Report
You can print the Network Configuration Report to confirm the current network settings.
a Turn the machine on and wait until it is in the Ready state.
b Press Menu, 4, 6.
c Press Start.
The machine will print the current network settings.
d Press Stop/Exit.
Restore the network settings to factory default
To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
b Press Menu, 5, 0.
c Press 1 to choose Reset.
d Press 1 to choose Yes.
The machine will restart,