Setting Up the Machine
8
STEP 1
4
Set Your Country
(For Australia / New Zealand
Customer Only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1Check that the power is turned on by plugging
in the power cord and turn the power switch on.
Press OK.
Set Country
Press OK Key
2Press or to choose the country
(Australia, or New Zealand).
Australia
Select ab or OK
3Press OK when the LCD shows your country.
4The LCD prompts you to make sure of the
country again.
Australia?
1.Yes 2.No
5If the LCD shows the correct country, press 1
to go to step 6.
Or press 2 to go back to step 2 to choose the
country again.
6After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.
5 Setting the date and time
The machine displays the date and time, and if you
set up the station ID, the date and time displayed on
your machine will be printed on every fax you send.
1Press Menu.
2Press 0.
3Press 2.
4Enter the last two digits of the year on the dial
pad, and then press OK.
Date&Time
Year:2008
(e.g. Enter 0, 8 for 2008.)
5Enter the two digits for the month on the dial
pad, and then press OK.
Date&Time
Month:03
(e.g. Enter 0, 3 for March.)
6Enter the two digits for the day on the dial pad,
and then press OK.
Date&Time
Day:25
(e.g. Enter 2, 5.)
7Enter the time in 24-hour format on the dial
pad, and then press OK.
Date&Time
Time:15:25
(e.g. Enter 1, 5, 2, 5 for 3:25 P.M.)
8Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step 1.