Brother MFC-7450, MFC-7840N 1, 2, 3, 4, 5, 6, 7

Installing the Driver & Software

STEP 2

Macintosh®

USB

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on pages 5 through 11.

Note

For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to

Mac OS® X 10.2.4 or greater. (For the latest

information for Mac OS® X, visit

http://solutions.brother.com/)

1Plug the AC power cord into an AC outlet. Turn

the power switch on.

2Connect the USB interface cable to your

computer, and then connect it to the machine.

Improper Setup

DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

3Turn on your Macintosh®.

4Put the supplied CD-ROM for Macintosh® into

your CD-ROM drive.

5Double-click the Start Here OSX icon to install.

Follow the on-screen instructions.

Note

• Please see the Software User’s Guide on the

CD-ROM to install the PS driver. (MFC-7340 and

MFC-7840N only)

• Please wait, it will take a few seconds for the

software to install. After the installation, click

Restart to finish installing the software.

6The Brother software will search for the Brother

device. During this time the following screen

will appear.

7When this screen appears, click OK.

For Mac OS® X 10.3.x or greater users:

The MFL-Pro Suite, Brother printer driver,

scanner driver and Brother

ControlCenter2 have been installed and

the installation is now complete.

Go to step 12.