USBMacintosh®

For USB Interface Users (For Mac OS® X 10.2.4 or greater)

23 Before you install

a Make sure your machine is connected to the power and your Macintosh® is ON. You must be logged on with Administrator rights.

Important

•For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to Mac OS® X 10.2.4 or greater. (For the latest information for Mac OS® X, visit http://solutions.brother.com/)

•Make sure there are no memory cards or a USB Flash memory drive inserted.

24 Connect the USB cable

Important

•DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub.

•Connect the machine directly to your Macintosh®.

a Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position.

b Connect the USB cable to the USB socket

marked with a symbol. You will find the USB socket inside the machine on the right as shown below.

LAN USB

c Carefully route the USB cable through the trench and out the back of the machine as shown below and connect the cable to your Macintosh®.

Important

Make sure that the cable does not restrict the cover from closing, or an error may occur.

d Lift the scanner cover to release the lock a. Gently push the scanner cover support down b and close the scanner cover c.

 

1

2

3

20