Wired Network

Windows®

f Choose Wired Network Connection, and

then click Next.

g For Windows® XP SP2/Windows Vista® users, when this screen appears, choose Change the

Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next.

If you are using a firewall other than Windows®

Firewall or Windows® Firewall is off, this screen may appear.

See the instructions provided with your firewall software for information on how to add the following network ports.

„For network scanning, add UDP port 54925.

„For network PC-Fax receiving, add UDP port 54926.

„If you still have trouble with your network connection, add UDP port 137.

Note

•If the machine is configured for your network, choose the machine from the list, and then click Next.

This window will not appear if there is only one machine connected on the network, it will be chosen automatically.

If your machine shows APIPA in the IP Address field, click Configure IP Address and enter an IP address for your machine that is suitable for your network.

•If the machine is not yet configured for use on your network, the following screen appears.

Click OK.

The Configure IP Address window will appear. Enter an IP address for your machine that is suitable for your network by following the on-screen instructions.

h The installation of the Brother drivers will automatically start. The installation screens appear one after another.

Important

DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.

Note

For Windows Vista®, when this screen appears, click the check box and click Install to complete the installation correctly.

26