Wired Network | Macintosh® | |
For Wired Network Interface Users (For Mac OS® X 10.2.4 or greater)
23 Before you install
a Make sure your machine is connected to the power and your Macintosh® is ON. You must be logged on with Administrator rights.
Important
•For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to Mac OS® X 10.2.4 or greater. (For the latest information for Mac OS® X, visit http://solutions.brother.com/)
•Make sure there are no memory cards or a USB Flash memory drive inserted.
•If you have previously set up your machine for a wireless network and then want to set it up on a wired network, you should check that the machine’s Network I/F is set to Wired LAN. The wireless network interface will be inactive with this setting. On your machine, press MENU.
Press a or b to display Network and press
Network.
Press Network I/F. Press Wired LAN.
Press Stop/Exit.
24 Connect the network cable
a Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position.
b Connect the network cable to the LAN socket
marked with a 
symbol. You will find the LAN socket inside the machine on the left as shown below.
LAN USB
28