Wired Network

Windows®

c Choose Wired Network Connection (Ethernet), and then click Next.

NOTE

To install the PS driver (BR-Script3 printer driver), choose Custom Install, and then follow the on-screen instructions.

d When the Firewall/AntiVirus detected screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next.

If you are not using the Windows® Firewall, see the user’s guide for your software for information on how to add the following network ports:

For network scanning, add UDP port 54925.

For network PC-Fax receiving, add UDP port 54926.

If you still have trouble with your network connection, add UDP ports 161 and 137.

e The installation will automatically continue. The installation screens appear one after another. If prompted, follow any on-screen instructions.

IMPORTANT

DO NOT cancel any of the screens during the installation. It may take a few minutes for all screens to appear.

NOTE

•If prompted, choose your machine from the list, and then click Next.

•If your machine is not found over the network, confirm your settings by following the on-screen instructions.

•If there is more than one of the same model connected on your network, the IP Address and Node Name will be displayed to help you identify the machine.

•You can find your machine’s IP address and the Node Name by printing out the Network Configuration Report (see Print the Network Configuration Report on page 39).

•If the Windows Security screen appears, select the check box and click Install to complete the installation correctly.

f When the On-Line Registration screen appears, make your selection and follow the on-screen instructions. Once you have completed the registration process, click Next.

g When the Setup is Complete screen appears, make your selection, and then click Next.

18 Finish and restart

a Click Finish to restart your computer. After restarting the computer, you must log on with Administrator rights.

NOTE

•If an error message appears during the software installation, do one of the following:

-For Windows® XP, Windows Vista® and Windows® 7 users: run the Installation

Diagnostics located in (Start) >

All Programs > Brother > MFC-XXXX LAN (where MFC-XXXX is your model name).

- For Windows® 8 users: to run Installation

Diagnostics, double-click the (Brother

Utilities) icon on the desktop, and then click the drop-down list and select your model name (if not already selected). Click Tools in the left navigation bar.

•Depending on your security settings when using the machine or its software, a Windows® Security or antivirus software window may appear. Please allow or permit the window to continue.

Wired

®Windows

Network

 

Macintosh

 

 

17