Wired Network

Macintosh

 

 

For Macintosh Wired Network Interface Users

(Mac OS X v10.6.8, 10.7.x, 10.8.x) (MFC-9330CDW / MFC-9340CDW)

16 Before you install

IMPORTANT

For Mac OS X v10.6.7 or lower users: upgrade to Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the latest drivers and information for the Mac OS X you are using, visit http://solutions.brother.com/.)

a Make sure your machine is connected to an AC power source and your Macintosh is ON. You must be logged on with Administrator rights.

b Remove the protective cap from the Ethernet

port marked with a symbol on your machine.

c Connect the network interface cable to the Ethernet port on your machine, and then connect it to a free port on your hub.

d Make sure your machine is turned on.

17 Install MFL-Pro Suite

a Put the CD-ROM into your CD-ROM drive, and then double-click the BROTHER icon on your desktop.

b Double-click the Start Here OSX icon. If prompted, select your model.

c Choose Wired Network Connection (Ethernet), and then click Next.

d The installation screens appear one after another. If prompted, follow any on-screen instructions.

IMPORTANT

DO NOT cancel any of the screens during the installation. It may take a few minutes for the installation to complete.

e Choose your machine from the list, and then click Next.

NOTE

If your machine is not found over the network, confirm your network settings (see Before you install on page 19).

Wired

®Windows

Network

 

Macintosh

 

 

19