For Wireless Network Users
d When the Firewall/AntiVirus detected screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next.
If you are not using the Windows® Firewall, see the user’s guide for your software for information on how to add the following network ports:
For network scanning, add UDP port 54925.
For network
If you still have trouble with your network connection, add UDP ports 161 and 137.
e Choose Yes, I have a USB cable to use for installation., and then click Next.
NOTE
If the Important Notice screen appears, read the notice. Check the box after you confirm the SSID and Network Key, and then click Next.
f Temporarily connect the USB cable (not included) directly to the computer and the machine.
g Do one of the following:
If the Installation confirmation screen
appears, check the box and click Next, and then go to h.
If the Installation confirmation screen does not appear, go to i.
h Check Yes if you want to connect with the listed SSID. Click Next, and then go to k.
i The wizard will search for available wireless networks from your machine. Choose the SSID that you wrote down for your network in step
NOTE
•If the list is blank, check that the wireless access point/router has power and is broadcasting the SSID. See if the machine and the wireless access point/router are within range for wireless communication. Click Refresh.
•If your wireless access point/router is set to not broadcast the SSID, manually add it by clicking the Advanced button. Follow the
j Enter the Network Key you wrote down in step
| NOTE |
|
|
|
|
| Windows® | ||||
|
|
| |||
| If your network is not configured for |
| Wireless | ||
|
| ||||
| Authentication and Encryption, the ATTENTION! |
| |||
|
|
|
| ||
| screen will appear. To continue configuration, |
|
|
| |
| click OK. |
|
|
| |
|
|
|
| Network |
|
|
|
|
|
| |
|
|
|
| Macintosh | |
|
|
|
|
|
|
25