For Wireless Network Users

Setup using the CD-ROM and temporarily using a USB cable (Windows® and Macintosh)

18 Set up the wireless settings

IMPORTANT

•You need to temporarily use a USB cable during configuration (cable not included).

•If you are using Windows® XP, or using a network cable to connect your computer to your wireless access point/router, you need to know the SSID and Network Key of your wireless

access point/router that you wrote down in step 17-aon page 22 before you proceed.

NOTE

•If you use your machine in an IEEE 802.1x supported wireless network, see Network User's Guide: Using IEEE 802.1x authentication.

•The screens in this step are from Windows®. The screens on your computer will vary depending on your operating system.

a Put the CD-ROM into your CD-ROM drive.

NOTE

(Windows®)

•If the model name screen appears, choose your machine. If the language screen appears, choose your language.

•If the Brother screen does not appear automatically, go to Computer (My Computer).

(For Windows® 8: click the (File Explorer) icon on the taskbar, and then go to Computer.) Double-click the CD-ROM icon, and then double-click start.exe.

•If the User Account Control screen appears, click Continue or Yes.

b (Windows®)

Click Install MFL-Pro Suite, and click Yes in the next two windows if you accept the license agreements.

NOTE

If the installation does not continue automatically, restart the installation by ejecting and then reinserting the CD-ROM or by double-clicking the start.exe program from the root folder. Continue from step b to install MFL-Pro Suite.

(Macintosh)

Double-click the BROTHER icon on your desktop, and then double-click the Start Here OSX icon on the screen. If prompted, select your model.

c Choose Wireless Network Connection, and

then click Next.

For Windows®, go to d

For Macintosh, go to e

NOTE

(Windows®)

To install the PS driver (BR-Script3 printer driver), choose Custom Install, and then follow the on-screen instructions.

24