4 | Network Scanning |
(For models with |
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the control panel (See Control Panel Setup in the Network User’s Guide) or by using the BRAdmin Light software. If you installed the machine following the instructions for a network user in the Quick Setup Guide then the machine should already be configured for your network.
Note
• For network scanning, a maximum of 25 clients can be connected to one machine on a network. For | 4 |
example, if 30 clients try to connect at a time, 5 of those clients will not be shown on the LCD. |
•If your PC is protected by a firewall, and is unable to network scan, you may need to configure the firewall settings. If you are using Windows® Firewall and you installed
Before using Network Scanning
Network license
This product includes a PC license for up to 2 Users.
This license supports the installation of the
If you want to use more than 2 PCs with ScanSoft™ PaperPort™ 11SE installed, please buy the Brother
96