Network Scanning (For models with
How to set a new default for Scan to FTP
You can set your own default settings for Quality, File Type, Glass ScanSize and File Name.
Setting the new default
a Press the | (Scan) key. |
b Press a or b to choose Scan to FTP. | |
Press OK. | 4 |
c Press a or b to choose <Manual>. Press OK.
Note
If there is no FTP Profile configured, skip c and go to d.
d Enter the FTP host address (for example ftp.example.com up to 60 characters) or the IP address (for example 192.23.56.189).
Press OK.
e Enter the destination folder (for example /brother/abc/, up to 60 characters). Press OK.
f Enter the username. Press OK. g Enter the password. Press OK.
h Press and choose your new setting. Repeat this step for each setting you want to change.
i After changing the last setting, press a or b to choose Set New Default. Press OK.
j Press 1 to choose Yes. k Press Stop/Exit.
117