Enter the password. Press OK.

Network Scanning (For models with built-in network support)

Factory reset

You can reset Quality, File Type, Glass ScanSize and File Name to the factory settings.

a Press the (Scan) key.

b Press a or b to choose Scan to FTP. Press OK.

c Press a or b to choose <Manual>.

4

Press OK.

Note

If there is no FTP Profile configured, skip c and go to d.

d Enter the FTP host address (for example ftp.example.com up to 60 characters) or the IP address (for example 192.23.56.189).

Press OK.

e Enter the destination folder (for example /brother/abc/, up to 60 characters). Press OK.

f Enter the username. Press OK.

g

h Press a or b to choose Factory Reset. Press OK.

i Press 1 to choose Yes. j Press Stop/Exit.

118