Network Scanning (For models with
Scan to OCR
When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh® you designated on your network. The ControlCenter2 will launch the Presto! PageManager and convert your document into text that can be viewed and edited from a word processing application on the designated
Macintosh®.
a Load your document.
b Press the 
(Scan) key.
c Press a or b to choose Scan to OCR. Press OK.
d Press a or b to choose the destination Macintosh® you want to send to. Press OK.
If the LCD prompts you to enter a PIN number, enter the
Macintosh® on the control panel. Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the cursor, then use a or b to enter the second digit. Repeat until you have entered all four digits of the PIN number. Press OK.
e Press Black Start or Color Start.
The machine starts the scanning process.
For Touchscreen models |
| ||
a Load your document. | 12 | ||
b Press the | (Scan) key. | ||
| |||
c Press Scan to OCR.
d Press a or b to display the destination Macintosh® you want to send to.
e Press the destination Macintosh® and then press OK.
If the LCD prompts you to enter a PIN number, enter the
Macintosh® on the control panel. Press OK.
f Press Black Start or Color Start.
The machine starts the scanning process.
Note
•Presto! PageManager must be installed on your Macintosh®.
•You can’t choose color Scan type for this function. Black Start or Color Start do not change the settings.
222 