Network Scanning (For models with
Scan to File
When you choose Scan to File, you can scan a black and white or color document and send it directly to the Macintosh® you designate on your network. The file will be saved in the folder and file format that you have
configured in ControlCenter2 on the designated Macintosh®. You can change the Scan configuration. (See File on page 203.)
a Load your document.
b Press the 
(Scan) key.
c Press a or b to choose Scan to File. Press OK.
d Press a or b to choose the destination Macintosh® you want to send to. Press OK.
If the LCD prompts you to enter a PIN number, enter the
Macintosh® on the control panel. Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the cursor, then use a or b to enter the second digit. Repeat until you have entered all four digits of the PIN number. Press OK.
e Press Black Start or Color Start.
The machine starts the scanning process. |
| |
For Touchscreen models |
| |
a Load your document. | 12 | |
b Press the | (Scan) key. |
|
c Press Scan to File.
d Press a or b to display the destination Macintosh® you want to send to.
e Press the destination Macintosh® and then press OK.
If the LCD prompts you to enter a PIN number, enter the
Macintosh® on the control panel. Press OK.
f Press Black Start or Color Start.
The machine starts the scanning process.
223