55
3
eUnfold the fabric, and then iron the tucks
down to one side.
Joining
Decorative bridging stitches can be sewn over the
seam allowance of joined fabrics. This is used when
making a crazy quilt.
aAttach zigzag foot “J”.
bSew together the right sides of the two pieces
of fabric, and then open up the seam
allowances.
aWrong side of fabric
b6.5 mm (1/4 inch) seam allowance
cStraight stitch
cSelect stitch , or .
dTurn the fabric over so that the right side
faces up, and then sew over the seam with the
center of the presser foot aligned with the
seam.
aRight side of fabric
Heirloom stitching
When sewing with the wing needle, the needle holes
are enlarged, creating a lace-like decorative stitch.
This is used to decorate hems and tablecloths on thin
or medium weight fabrics in addition to plain weave
fabrics.
aInsert the wing needle.
• Use a 130/705H 100/16 wing needle.
• For details on inserting a needle, refer to
“Replacing the needle” (page 21).
bAttach monogramming foot “N”.
cSelect stitch , , , , or .
dStart sewing.
1
1
2
3
●The needle threader cannot be used with the
wing needle, otherwise the sewing machine
may be damaged. Manually pass the thread
through the eye of the needle from the front
to the back. For details, refer to “Upper
threading” (page16).
●Select a stitch width of 6.0 mm (15/64 inch)
or less, otherwise the needle may bend or
break.
●After adjusting the stitch width, slowly turn
the handwheel toward you (counterclockwise)
and check that the needle does not touch the
presser foot. If the needle hits the presser
foot, the needle may bend or break.
CAUTION
CAUTION