Configuring your machine for a wireless network (For
Windows Vista®/Windows® 7
If you are using your computer as a Registrar, follow these steps:
Note
•To use a Windows Vista® or Windows® 7 computer as a Registrar, you need to register it to your network in advance. See the instruction supplied with your WLAN access point/router.
• If you use Windows® 7 as a Registrar, you can install the printer driver after the wireless configuration by | 3 |
following the
1(Windows Vista®)
Click the button and then Network. (Windows® 7)
Click the button and then Devices and Printers.
2(Windows Vista®)
Click Add a wireless device. (Windows® 7)
Click Add a device.
3Choose your machine and click Next.
4Input the PIN which the LCD shows in step f and then click Next.
5Choose your network that you want to connect to, and then click Next.
6Click Close.
h If your wireless device is connected successfully, the display shows Connected.
The machine will print your machine's wireless status report. If the connection failed, check the error code on the printed report and refer to uu Quick Setup Guide: Troubleshooting.
(Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Start Here OSX from the
40