Press a or b to display WPS w/PIN Code, and then press WPS w/PIN Code.
Press Menu. Press Network. Press WLAN.

Configuring your machine for a wireless network (For MFC-8710DW, MFC-8910DW and MFC-8950DW(T))

For Touchscreen models

a b c

d3

e When WLAN Enable? is displayed, press On to accept. This will start the wireless setup wizard.

To cancel, press Stop/Exit.

f The LCD will show an 8 digit PIN and the machine starts searching for an access point.

g Using a computer that is on the network, type “http://access point’s IP address/” into your browser.

(Where “access point’s IP address” is the IP address of the device that is used as the Registrar 1.) Go to the WPS setting page and input the PIN which the LCD shows in f to the Registrar and follow the on-screen instructions.

1The Registrar is normally the WLAN access point / router.

Note

The setting page is different, depending on the brand of access point / router. See the instruction manual supplied with your access point / router.

41