
Wireless configuration for Windows® using the Brother installer application (For
Configuration in Infrastructure mode
Before configuring the wireless settings
IMPORTANT
•If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again.
(For | 4 |
Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK. Press 1 or a to reset and then press 1 or a to accept the change. The machine will restart automatically.
(For
Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK. Press 1 or + to reset and then press 1 or + to accept the change. The machine will restart automatically.
(For
Press MENU, a or b to display Network, press Network. Press Network Reset, and choose Yes to reset and then press Yes for 2 seconds to confirm. The machine will restart automatically.
•If you are using Windows® Firewall or a firewall function of
•You need to temporarily use an Ethernet cable (not included) during configuration.
•Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using more than one WEP KEY enter the KEY used for the first WEP KEY.
•Before configuring your machine we recommend you write down the SSID and Password (if required) for your wireless network. You will need this information before you continue with the configuration.
Item | Record the current wireless network settings |
Network name: (SSID/ESSID)
Password
49