Wireless configuration for Windows® using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW)

Note

•If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.

•If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add button. Check This is an Ad-hoc network and there is no access point., and then enter the Name (SSID) and the Channel number, and then click Next.

4

m If your network is not configured for Authentication and Encryption, the following screen will appear. To continue configuration, click OK and go to step o.

n Then enter the Network Key and Confirm Network Key, and then click Next.

68