Wireless Configuration for Macintosh using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW)

Configuration using SES, WPS or AOSS from the control panel menu (Automatic wireless mode)

Before configuring the wireless settings

IMPORTANT

If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again.

(For DCP-373CW, DCP-375CW, DCP-377CW, MFC-253CW, MFC-255CW and MFC-257CW)

5

Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK.

 

Press 1 or a to reset and then press 1 or a to accept the change. The machine will restart automatically.

 

(For DCP-593CW, DCP-595CW, DCP-597CW and MFC-495CW)

Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK. Press 1 or + to reset and then press 1 or + to accept the change. The machine will restart automatically.

(For MFC-795CW)

Press MENU, a or b to display Network, press Network. Press Network Reset, and choose Yes to reset and then press Yes for 2 seconds to confirm. The machine will restart automatically.

Configure the wireless settings

a Press Menu.

Press a or b to choose Network, press OK. Press a or b to choose Network I/F, press OK. Choose WLAN.

(For Touchscreen models)

Press MENU. Press Network. Press Network I/F and then press WLAN.

b Turn on your Macintosh.

c Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your desktop.

81