Easy maintenance
Daily cleaning and lubrication can efficiently be done in a shorter time.
Centralized lubrication system
The places to supply oil have been concent- rated into one. Minimum oil is automatically lubricated with wicks from the oil tank to every parts requiring lubrication, such as the areas of the needle bar
and looper base. The oil level win- dow is laid out at the position easy to check.
Thread waste can be collected
The machine is equipped with a special pocket in which thread waste can gather. This prevents thread waste from littering, keeping the working environment clean.
Eyelet cloth chips can be cleared
Cloth chips made at eyelet cutt- ing can be cleared by air pres- sure.
Easy adjustment favorable to maintenance staffs
While continuing the conventional basic adjusting method, many improvements have been made. Installation to production lines and fine adjustment of the machine can be done in a shorter time.
•The number of air tubes has been reduced, saving the trouble of connecting.
•Adjustment of the needle bar and the loopers can be made with the familiar, conventional method.
•An eccentric pin is adopted for the spreader. It enables adjustment without steps, making the operation easier.
Durability of the machine has been improved
The rigidity of the machine arm has been enhanced. Nicking of the knife is substantially reduced by minimizing lateral movement of the hammer against the knife.
Economical model with low power consumption
With the adoption of a
Power consumption
| 35% | 37% |
|
| reduction | reduction | |
Conventional model |
|
| |
2,200 | 2,500 | 2,200 | (rpm) |
Semi-submerged installation is available
By using the optional parts for