![T-8452C,T-8722C,T-8752C](/images/new-backgrounds/47365/473655x1.webp)
T-8452C,T-8722C,T-8752C
Great Needle Penetration Force
Powerful 550W motor outputs large amounts of torque even at slow speeds so that strong needle penetration force can be obtained. This allows accurate sewing of heavy materials and joints. If the needle penetration resistance increases, such as when sewing heavy materials and materials with joints, vibration control (intermittent impact) automatically increases the penetration force.(Patent pending)
Easy Thread Trimming Timing Adjustment (T-8422C/8452C/8722C/8752C)
Adjustment of the thread trimming timing is done simply by adjusting the position of the thread trimming cam relative to the lower shaft. There is no need to remove the timing belt and the timing between the needle and the rotary hook does not change, so there is no need for troublesome
Low Noise and Low Vibration for
Using a
Further Improved Ease of Operation
According to the operator's preference (G50 panel)
The curve of the acceleration at sewing start can be selected on the operation panel. The machine provides more options for customizing operations by the operator's preference.
Sewing speed
Stroke |
(Treadle depression amount)
Quick back device
This is located in a place where it can be pressed easily in order to increase working efficiency.
Jeans
| Direct Drive,large hook,w/ thread trimmer | |
/ thread trimmer | Direct Drive,split needle bar,large hook, | |
w/ thread trimmer |
Bags
Direct Drive
w/o thread trimmer
| ・Great needle penetration force | ・Clean sewing |
sewn by | ・Selectable needle feed/lower feed |
|