Using the Label Peeler
c Insert the RD Roll so that the labels feed with the side to be printed on facing up (1), as shown.
d While lifting up the media guide adjustment lever (1), push in both media guides (2) to fit the width of the paper.
1
1
2
e Feed the end of the RD Roll under the media tip guides (1).
Use RD Rolls with a maximum outer
dimension of 5" (127 mm) or less.
Use RD Rolls designed for TD1 series printers. Regardless of the
size, some RD Rolls may not be usable.
Insert the RD Roll facing the correct direction. If the RD Roll is not inserted correctly, the printer will not print on the correct side of the paper or label.
When using media with the labels | 13 |
rolled up on the inside, insert the roll | |
in the opposite direction of that |
|
shown in step c so that the print |
|
side of the labels will face up. |
|
107 